Curtiss-Wright DuraCOR 311 - Miscellaneous Configuration

DuraCOR 311
Appendix C – BIOS Settings
MNL-0667-01 Rev B2
ECO-5941
Effective: 17 Mar 20
Page 65 of 72
SCC SD Card Support
Disable
Enable
Enable / Disable SD Card Support
SD SDR 25 Support
Disable
Enable
Enable bus speed operation up to
25MB/s for SDCard
(High Speed). Disable limits bus
speed to 12.5MB/s (normal speed)
SD SDR 50 Support
Disable
Enable
Enable bus speed operation up to
50MB/s for SDCard (Ultra High
Speed). Disabled activates SDR25
mode setting
SD SDIO Support
Disable
Enable
Enable / Disable SD SDIO Support
MIPI HSI Support
Disable
Enable
Enable / Disable MIPI HSI Support
LPSS DMA #X
Disable
Enable
Enable / Disable LPSS DMA Channel
#X
LPSS I2C #X (1-5)
Disable
Enable
Enable / Disable LPSS I2C Channel
#X
LPSS I2C #X (6-7)
Disable
Enable
Enable / Disable LPSS I2C Channel
#X
LPSS HSUART #X
Disable
Enable
Enable / Disable LPSS High Speed
UART Channel #X
Miscellaneous Configuration
Feature
Options
Description
High Precision Timer
Disable
Enable
Enables or Disables the High
Precision Event Timer
Boot Time with HPET Timer
Disable
Enable
Boot time calculation with High
Precision Event Timer enabled