Curtiss-Wright DuraCOR 311 - SMBIOS Event Log

DuraCOR 311
Appendix C – BIOS Settings
Page 66 of 72
MNL-0667-01 Rev B2
ECO-5941
Effective: 17 Mar 20
State After G3
S0
State
S5
State
Specify what state to go to when
power is re-applied after a power
failure (G3 state). S0 = Power on, S5
= Stay off
Clock Spread Spectrum
Disable
Enable
Enables or Disables the Clock
Spread Spectrum
SMM LOCK
Disable
Enable
Enables or Disables the SMM Lock
feature. It will lock the SMRAM and
unable load SMM driver any more
PCI Mmio Size
2GB
1.5GB
1.25GB
1GB
Selects the PCI Mmio Size
PXE ROM
Disable
Enable
Enables or Disables the PXE Boot
ROM
SMBIOS Event Log
Feature
Options
Description
Event Log
Disable
Enable
Enables or Disables the SMBIOS
Event Log
Mark SMBIOS events as read
Enter
Mark SMBIOS events as read.
Marked SMBIOS events won't be
displayed
Clears SMBIOS events
Enter
Clear SMBIOS events