Curtiss-Wright DuraCOR 311 - Page 50

DuraCOR 311
Appendix C – BIOS Settings
Page 50 of 72
MNL-0667-01 Rev B2
ECO-5941
Effective: 17 Mar 20
Quick Boot
Disabled
Enabled
Enable or Disable Quick Boot
Dark Boot
Disabled
Enabled
Enable or Disable Dark Boot
Diagnostic Splash Screen
Disabled
Enabled
Enable or Disable the Diagnostic Splash Screen
Diagnostic Summary
Screen
Disabled
Enabled
Display the Diagnostic Summary Screen during
boot
BIOS Level USB
Enabled
Disabled
Enable/Disable all BIOS support for USB in order to
reduce boot time. Note that this will prevent using a
USB keyboard in setup or a USB biometric scanner
such as a fingerprint reader to control access to
setup, but does not prevent the operating system
from supporting such hardware
Console Redirection
Disabled
Enabled
Enable/Disable Universal Console Redirection
- Console Port
All
Onboard COM1
Onboard COM2
SIO COM1
SIO COM2
Select Port for console redirection. Note: the
respective port has to be enabled in setup!
- Terminal Type
ANSI
VT100
VT100+
UTF8
Set terminal type of UCR
- Baudrate
9600
19200
38400
57600
115200
Set terminal type of UCR
- Flow Control
None
RTS/CTS
XON/XOFF
Set flow control method for UCR. None = No flow
control, RTS/CTS = Hardware flow control,
XON/XOFF = Software flow control
- Continue C.R. after
POST
Enabled
Disabled
Enables Console Redirection after OS has loaded
Allow Hotkey in S4
resume
Enabled
Disabled
Enable hotkey detection when system resuming
from Hybernate state
UEFI Boot
Enabled
Disabled
Enable the UEFI boot
Legacy Boot
Enabled
Disabled
Enable the Legacy boot
Boot in Legacy Video
Mode
Disabled
Enabled
Enable to force the display adapter to switch the
video mode to Text Mode 3 at the end of BIOS
POST for nonUEFI boot mode (Legacy Boot).
Some legacy software, such as DUET, requires
that the BIOS explicitly enter text video mode prior
to boot
Load OPROM
On Demand
All
Load all OPROMs or on demand according to the
boot device
Boot Priority
UEFI First
Legacy First
Select priority of boot option between UEFI and
Legacy