Curtiss-Wright DuraCOR 312 - Applications; Configurations; Base System; Table 1 Duracor 312 Standard Configurations

DuraCOR 312
Chapter 1 - Introduction
MNL-0670-01 Rev A2
ECO-5931
Effective: 03 Jun 20
Page 11 of 59
 Qualified to MIL-STD-810G/DO-160 thermal, shock, vibration, altitude, humidity; also MIL-STD-
461F/DO-160G EMI/EMC
Applications
 In-vehicle and airborne rugged mission computing and sensor integration
 High-performance embedded computing (HPEC) and general-purpose graphics processing
 SWaP-sensitive C4ISR autonomous vehicles, ISR, EW, targeting systems
Configurations
Due to the modularity of the DuraCOR 312 (M.2 / mSATA / Removable SSD and pre-integrated Mini-PCIe
cards), numerous configuration variants are possible. Please consult with your sales representative and
application engineer to assess your technical requirements and recommended system configuration.
Table 1 DuraCOR 312 Standard Configurations
Product Number
Description
C312-00R
DuraCOR 312, NVIDIA Jetson TX2i, 32 GB onboard flash storage, no M.2 / mSATA,
Removable 2.5” SSD storage bay (disk and tray sold separately)
C312-00
DuraCOR 312, NVIDIA Jetson TX2i, 32 GB onboard flash storage, no M.2 / mSATA
C312-01
DuraCOR 312, NVIDIA Jetson TX2i, 32 GB onboard flash storage, 32 GB M.2 storage
C312-03
DuraCOR 312, NVIDIA Jetson TX2i, 32 GB onboard flash storage, 64 GB M.2 storage
C312-04
DuraCOR 312, NVIDIA Jetson TX2i, 32 GB onboard flash storage, 128 GB M.2 storage
C312-05
DuraCOR 312, NVIDIA Jetson TX2i, 32 GB onboard flash storage, 256 GB M.2 storage
C312-06
DuraCOR 312, NVIDIA Jetson TX2i, 32 GB onboard flash storage, 512 GB M.2 storage
C312-07
DuraCOR 312, NVIDIA Jetson TX2i, 32 GB onboard flash storage, 1 TB M.2 storage
Add on, -100
MIL-STD-1553, dual port mini-PCIe card
Add on, -P
50-ms Power Hold-up Option
Base System
The base system integrates a NVIDIA Jetson TX2i module. The base system comes pre-installed with
the Linux 4 Tegra (L4T) with the LTS Linux Kernel on the 32GB onboard flash.