Case
1
Disconnect the
power supply cable
2
To clean the device,
use compressed air or a soft cloth
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the device.
ON
Alcohol, solvent
Cutter
1
Disconnect the power supply cable and
open the device cover (see par. 4.3)
2
Clean the cutter by
using compressed air
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the device.
ON
Alcohol, solvent
54
To Next Page
Loading...
