21
TRUSCULPT OPERATOR MANUAL
D1395, REV. K, 02/18
Selecting Treatment Parameters
There are only two user-selectable parameters on the RF Handpiece Control screen: target temperature
and pulse duration.
Target Temperature
Target temperature is measured in degrees Celsius and refers to the target temperature for the skin and
not the measured real-time temperature. Select the target temperature by touching the and
buttons below the “° C” display.
Target Temperature Display and Controls
Pulse Duration
Pulse duration is measured in minutes and seconds and refers to the length of time RF energy is
delivered to the patient. Select the pulse duration by touching the and buttons below the
“min:sec” display.
Pulse Duration Display and Controls
To Next Page
Loading...
