Need help?Do you have a question about the Cutera Excel V+ and is the answer not in the manual?
General| Wavelengths | 532 nm, 1064 nm |
|---|---|
| Cooling System | Integrated sapphire contact cooling |
| Repetition Rate | Up to 10 Hz |
| Spot Sizes | 2 mm to 8 mm |
| Fluence | Up to 600 J/cm² |
| Indications | pigmented lesions |
| Display | Touchscreen |
| Power Requirements | 200-240 VAC, 50/60 Hz |
| Laser Type | Nd:YAG |
| Weight | Approximately 100 kg |
Overview of the Cutera excel V+ dual-wavelength laser system for treating dermatologic conditions.
Details on the 532 nm and 1064 nm laser wavelengths, their properties, and target tissue absorption.
Information on system installation, setup by Cutera representative, and initial functional checks.
Description of the excel V+ system, including console, handpieces, footswitch, and accessories.
Procedure for powering on the excel V+ system using the keyswitch and system self-test.
Instructions for restarting, turning off, and emergency shutdown of the excel V+ system.
Steps for safely disconnecting the system and procedures for moving the system console.
Overview of general functionalities including user interface modes and system displays.
Guidance on inspecting and connecting system components, cables, and electrical connections.
Procedure for plugging the footswitch cable into the system console's receptacle.
Instructions for inserting the remote interlock plug into its receptacle for safety.
Detailed steps for aligning, connecting, and locking the handpiece to the system console.
Procedure for inserting a dummy plug into vacant handpiece receptacles.
Steps for connecting the system's main power cable to the electrical outlet.
Explanation of Expert and Navigation modes for the CoolView handpiece.
Description of the CoolView Select Screen display and navigation options.
Overview of the CoolView Treatment Screen display in Expert and Navigation modes.
Description of the Genesis V Treatment Screen and its functionalities.
Overview of the Dermastat Treatment Screen and its operational capabilities.
Explanation of system states, including STANDBY and READY modes and their indicators.
Functionality for storing and recalling frequently used treatment parameters.
Accessing and using the Information & Adjustment Screen for system settings.
Adjusting aiming beam functions, intensity, and modes from the Information screen.
Description of audible tones and voice prompts, and how to adjust their volume.
Explanation of various displays and indicators on the system for accurate operation.
Understanding how fluence and pulse duration affect laser-tissue interaction.
Guidance on operating the CoolView handpiece in navigation and expert modes.
Steps for selecting treatment parameters using the navigation mode interface.
Instructions for manually selecting treatment parameters in expert mode.
How to select between 532 nm and 1064 nm wavelengths on the CoolView screen.
Procedure for adjusting the laser spot size using the controls on the CoolView screen.
Selecting the desired laser fluence, measured in joules per square centimeter.
Selecting the laser pulse duration, measured in milliseconds.
Setting the repetition rate, measured in hertz, for laser pulse delivery.
Adjusting the temperature of the CoolView handpiece's sapphire cooling window.
Procedure for selecting the fluence setting on the Dermastat Treatment Screen.
Setting the pulse duration parameter for the Dermastat handpiece.
Adjusting the repetition rate for the Dermastat handpiece.
How to select the 532 nm or 1064 nm wavelength on the Genesis V screen.
Procedure for selecting the fluence setting on the Genesis V Treatment Screen.
Setting the pulse duration parameter for the Genesis V handpiece (532 nm only).
Adjusting the repetition rate for the Genesis V handpiece.
Guide to identify and correct common system operational problems.
Explanation of system error codes and how they are displayed.
Schedule for annual preventive maintenance and calibration checks by a Cutera representative.
Information on system repairs, to be performed by a Cutera-certified service engineer.
Daily, weekly, and as-needed user maintenance tasks for the system.
General guidance on inspecting and cleaning handpiece optical surfaces.
Procedures for cleaning the external surfaces of the handpiece housing.
Steps for inspecting and cleaning the recessed handpiece lens(es).
Procedure for cleaning the patient contact and proximal surfaces of the cooling window.
How to keep the heat exchanger intake free of dust and lint to prevent overheating.
Instructions for filling the system's coolant reservoir with distilled water.
Table detailing pin assignments for connecting an external door switch.
Information on electrical configurations and requirements for the excel V+ system.
Technical details of the 532 nm and 1064 nm treatment beams.
Specifications regarding system size, weight, and umbilical cable.
Laser classifications, FDA/CDRH classification, and eye safety information.
Requirements and recommendations for periodic laser output calibration.
List of necessary equipment for performing system calibration.
Step-by-step guide for performing system calibration.
Environmental information and guidelines for proper disposal of the system.
Details regarding the warranty for the excel V+ system.
Overview of safe and effective instrument use requiring understanding of system features.
Information on laser safety eyewear requirements and optical hazards.
Important precautions regarding flammables, modifications, and intended use.
Requirements for trained personnel and recommended training resources.
Guidelines for safe operation, including plume evacuation and handpiece handling.
List of standards and directives the excel V+ system complies with.
Applications requiring selective photothermolysis of target chromophores.
Indications for the 532 nm wavelength in dermatology treatments.
Indications for the 1064 nm wavelength in dermatology treatments.
Conditions or patient types for which the system should not be used.
Important warnings and precautions related to treatment parameters and patient history.
Potential transient events and adverse effects that may occur after treatment.
Safety precautions for operating personnel and patients during treatment.
Reference to treatment-specific guidelines and resources.
Importance of patient consultation, medical history, and risk discussion.
Visual representation of the DANGER label for laser radiation.
Description and location of various laser system symbols and their references.
List of cited scientific publications related to laser therapy.
Contact information and addresses for Cutera's world headquarters and regional offices.
To Next Page
