Cutera truSculpt - Introduction

1
TRUSCULPT OPERATOR MANUAL
D1395, REV. K, 02/18
Introduction
The Cutera
®
truSculpt uses radio frequency (RF) energy to provide topical heating for the purpose of
elevating tissue temperature for body sculpting, body contouring, fat reduction, and circumferential
reduction. In addition, the truGlide massage roller is intended to provide a temporary reduction in the
appearance of cellulite.
The truSculpt consists of a console, a truGlide massage roller, and one or more RF handpieces that
connect to the console with an umbilical cable. All system functions are controlled through the console.
During a treatment cycle, the RF handpiece is placed and held on the skin while RF-generated thermal
energy is delivered. A return pad returns current to the console. At the end of thermal energy delivery, the
handpiece is moved to the next area of skin to be treated and a new cycle is started. If desired, the
truGlide massage roller can be used prior to and/or following RF treatment to massage the entire
treatment area.
This operator manual describes the truSculpt, its operation, and maintenance. If after reviewing this
operator manual you have further questions regarding the truSculpt, contact your local Cutera
representative.
CAUTION
US federal law restricts this device to sale by or on the order of a
practitioner licensed by the law of the state in which he practices to
use or order the use of the device.