33
TRUSCULPT OPERATOR MANUAL
D1395, REV. K, 02/18
Annual System Maintenance
Preventive maintenance, safety, and power checks should be performed annually by a Cutera
representative to ensure proper system performance.
System Repair
All system repairs should be performed by a Cutera-certified service engineer. For training and
information, contact your local Cutera representative.
User Maintenance
Cleaning the Console
Clean the outer surfaces of the console with a damp cloth and mild detergent.
Cleaning the Handpieces
Thoroughly clean and disinfect the RF handpiece and truGlide massage roller after each patient.
1. Wipe down the external surfaces of the handpiece, with the exception of the RF electrode,
with a damp cloth and mild detergent.
2. Gently dab the RF electrode with a soft cloth, cotton swab, or gauze moistened with
isopropyl alcohol.
WARNING
Before disinfecting the RF handpiece, ensure that the system is
either turned OFF or in STANDBY mode.
CAUTION
Do not attempt to sterilize the RF handpiece or massage roller.
Damage will occur if the RF handpiece or roller is autoclaved or
immersed, or if liquid enters the RF handpiece housing.
CAUTION
Do NOT use abrasives such as sani-cloth, paper towels, or Kleenex
on the RF electrode. Using anything but alcohol can potentially
damage the RF handpiece electrode.
To Next Page
Loading...
