What to do if Cutera ExcelV system fails to operate properly?
If your Cutera Medical Equipment system isn't operating, first ensure the electrical disconnect switch (circuit breaker) is on (in the UP position). Also, check that the system is properly connected to an electrical service outlet. Verify that the remote interlock plug is correctly inserted into the interlock receptacle and confirm that the treatment room door is closed.
Provides a basic overview of the Cutera Excel V dual-wavelength laser system and its applications.
Details instructions for system setup, initial inspection, and functional checks before use.
Describes the main components of the Excel V system, including console, handpieces, and footswitch.
Step-by-step instructions for connecting the footswitch, remote interlock, and power cable.
Detailed procedure for connecting the desired handpiece to the system console.
Instructions on how to properly connect the system's main power cable.
Procedure for powering up the Excel V system, including keyswitch operation.
Instructions on how to use the emergency off button to immediately shut down the system.
Steps for safely disconnecting the system from power and components.
Guidelines and precautions for moving the Excel V system console.
Explanation of the two user interface modes (Expert and Navigation) for the CoolView handpiece.
Description of the system's operational states, STANDBY and READY modes.
Instructions for operating the CoolView handpiece, covering navigation and expert modes.
Guide to selecting treatment parameters using the system's navigation mode.
Guide to selecting treatment parameters manually in expert mode.
Procedure for choosing between the 532 nm and 1064 nm laser wavelengths.
How to adjust the laser spot size using the console and handpiece controls.
Procedure for setting the energy delivered per unit area (fluence).
How to set the duration of the laser pulse in milliseconds.
How to set the number of laser pulses delivered per second (repetition rate).
Procedure to adjust the temperature of the CoolView handpiece's cooling window.
Instructions for using the Genesis V handpiece, including parameter selection.
A guide to help locate and correct common problems with the Excel V system.
Explanation of system error codes and associated troubleshooting steps.
Regular maintenance tasks recommended for users, including cleaning and inspection.
General guidance for inspecting and cleaning both CoolView and Genesis V handpieces.
Detailed instructions for cleaning the recessed lenses on the handpieces.
Step-by-step instructions on how to fill the system's coolant reservoir with distilled water.
Information on electrical requirements and configurations for different regions.
Technical specifications for the Excel V system, including wavelengths, output, and parameters.
Critical information regarding eye protection and laser safety standards.
Instructions and requirements for performing periodic laser calibration.
Step-by-step guide for executing the laser calibration process.
Information on optical hazards associated with laser use and necessary eye protection.
Important safety considerations beyond basic operation, including flammability and modifications.
Warnings and precautions related to electrical hazards associated with the system.
Guidelines to prevent fire hazards, especially in the presence of flammable materials.
Information on mandatory training requirements for operating the system.
Essential safety practices to ensure safe operation of the laser system.
Details on the regulatory standards and directives the Excel V system complies with.
Explanation of the emergency off button's function for immediate system shutdown.
Overview of the general surgical and aesthetic applications for the Excel V system.
Specific dermatological indications for the 532 nm KTP laser wavelength.
Specific dermatological indications for the 1064 nm Nd:YAG laser wavelength.
Conditions or patient states that contraindicate the use of the Excel V system.
Important warnings to be observed during the operation of the Excel V system.
Essential precautions to take before and during patient treatment.
Information on potential transient events and adverse effects following treatment.
Specific safety precautions recommended for qualified personnel during treatment.
General| Brand | Cutera |
|---|---|
| Model | ExcelV |
| Category | Medical Equipment |
| Language | English |
To Next Page
