53
EXCEL V OPERATOR MANUAL
D1025, REV H, 10/17
Inspecting and Cleaning the External Surfaces of the Handpiece
Inspect and clean the handpiece housing, treatment guide and umbilical cable between patient use with
a germicidal disposable wipe, such as Sani-Cloth
®
Plus or Sani-Cloth
®
HB from Professional
Disposables International, Inc.
1
WARNING
Before inspecting and cleaning the handpiece, ensure that the
system is either turned off or in STANDBY mode. Always wear
proper protective eyewear while the system is on. Severe eye
damage can occur in the event of unintended laser emission.
CAUTION
Do not allow liquid or cleaning solution to enter the handpiece
housing as damage may occur.
CAUTION
Do not attempt to sterilize the handpiece. Damage will occur if the
handpiece is autoclaved, immersed or otherwise handled
improperly.
1. Sani-Cloth Plus and Sani-Cloth HB are registered trademarks of Professional Disposables
International, Inc.
To Next Page
Loading...
