22
EXCEL V OPERATOR MANUAL
D1025, REV H, 10/17
Memory Storage
The memory storage feature enables you to store and recall frequently used treatment parameters.
There are three memory banks in the memory storage feature, allowing for storage of three different sets
of treatment parameters.
To store the treatment parameters currently shown on the touchscreen display:
1. Press the (memory) button to display the memory pop-up window.
2. Press and hold number 1, 2 or 3 in the memory pop-up window until the system beeps.
Any existing treatment parameters stored in memory will be overwritten with the new parameters.
To recall previously stored treatment parameters:
1. Press the (memory) button to display the memory pop-up window.
2. Press and release the number next to the desired treatment parameters in the memory
pop-up window.
(CoolView Treatment Screen shown)
Location of Memory Button
Memory pop-up
window
Memory button
To Next Page
Loading...
