38
EXCEL V OPERATOR MANUAL
D1025, REV H, 10/17
The selected spot size appears in the (spot size) display on the CoolView Treatment Screen.
NOTE
When you reach the minimum spot size setting, the
-
button is disabled; when you reach the maximum spot size setting,
the + button is disabled. Changing the fluence and/or pulse duration
settings may make available a wider range of spot size settings.
CAUTION
In navigation mode, if you select a spot size that is not within the
recommended range of settings for the specified skin type and
application, the icon appears next to the spot size display to alert
you that the spot size is not recommended. You are still able to
operate the laser with the selected spot size, but you should
proceed with caution.
CoolView Treatment Screen in Navigation Mode with
Spot Size Setting Outside Recommended Range
To Next Page
Loading...
