39
TRUSCULPT OPERATOR MANUAL
D1395, REV. K, 02/18
WARNING
Do not attempt to perform maintenance other than that which is
outlined in this operator manual.
WARNING
Cleaning and maintenance should only be performed with the
system turned off and disconnected from the power source.
WARNING
The system is grounded through the grounding conductor in the
power cord. Grounding is essential for safe operation.
WARNING
Do not connect wet components to the truSculpt console.
WARNING
Do not allow fluid to contact any electrical connectors on the
truSculpt components or cables during use.
WARNING
DO NOT contact metal objects with an activated RF handpiece.
To Next Page
Loading...
