25
5. User constants■
Index
Motor autotuning
------------- P40 Motor autotuning
Function setting ------------- P42 Frequency setting
P44 Frequency command selection
P45 Operation command selection
P45 Acceleraion/ deceleration time
P46 Stop method
P47 Jump frequency
P47 Start frequency
P48 DC break
Output/ input terminals ------------- P49 Multi-functional analog input
P50 Analog output setting
P51 Multi-functional terminal setting (DI terminal)
P52 Jog frequency
P53 Multi-speed frequency command
P55 Multi-functional relay setting
V/F control ------------- P57 V/F curve selecting
P60 Frequency command limit
P61 Torque boost, torque boost gain
P62 Motor rated current
PID control ------------- P63 PID control
Multi-step function ------------- P67 The physical link
MODBUS ------------- P72 Data structure in communication
Protections ------------- P79 Preventing motor stalling function
P83 Motor search speed function
P85 Instantaneous current handling
P86 Overheating protection
Environment setting ------------- P87 Dynamic brake
P88 Carrier wave frequency
P90 Adjusting voltage and current
P92 Setting LCD keypad functions
P94 Recovering factory settings
To Next Page
Loading...
