2.
Delete unwanted channels by pressing Resistance Up or Down to change the right LED
window to [dEL].
Press Enter to delete channel. Repeat process for additional unwanted channels.
3. Adjust the near/far setting if available channels are not showing.
Press Setup key to change the setting from F (Far) to n (Near). Press Display option to
re-scan for available channels.
4.
Press Up or Down to scroll through and verify all TV channels.
If all TV transmitters are stored, and they all correlate the TV number to the correct TV heard, setup
is complete. If not you may need to re-scan or adjust the transmitter codes (see documentation for
your transmitters to perform a code change).
5. Press STOP to exit setup. Transmitter setup complete.
6. Proceed to Add FM Radio Stations (optional).
Setup TV FM Transmitters
If your TV’s use FM transmitters, follow these instructions to assign a TV channel to each frequency.
1.
Press and the hold the Display option and UP keys for 3 seconds.
Display will show time setup.
2.
Press DOWN to navigate to the A/V setup screen.
3.
Press the ENTER key.
4.
Press the UP or DOWN keys to select FM.
5.
Press the ENTER key.
6. Plug in headphones to listen for channels during setup.
7.
Press Display option to seek the next TV FM frequency or UP or DOWN to tune
manually.
8.
Press Resistance UP or DOWN keys to add [Add] a channel.
Press ENTER to save channel, std (stored) will be displayed.
9. Repeat steps 3 and 4 to add all TV FM channels.
10. Press Stop to exit setup when all the TV’s FM transmitter frequencies have a TV number.
Transmitter setup complete.
11. Proceed to Add FM Radio Stations (optional).
Page 31 of 82
Cybex 525AT Arc Trainer Part Number 5525-4 F
To Next Page
Loading...
Need help?
General
