Level unit
Confirm that the unit is on a level surface. If not, use a 9/16” open-end wrench to adjust the leveling feet
up or down.
Qty.Description
2Leveling Feet1
Install coax cable (E3 View Monitor option)
Install 6’ coax cable to the coax cable connector in base of unit.
Qty.Description
16’ Coax Cable1
1
Coax Cable
Connector
2
Visually inspect unit
1. Remove any packing material from unit.
2. Examine the unit to ensure that the assembly is correct and complete.
525R Assembly
Verify parts list shown below
DescriptionPart NumberQuantityItem
Base with covers attachedVaries11
Page 20 of 80
Cybex 525C/525R Cycle Part Number LT-24303-4 E
To Next Page
Loading...
Need help?
General
