5. Plug in headphones to listen for channels during setup.
Transmitter type display for LED consoles
806 MHz System863 MHz System900 MHz System
“J1 806” Japan
14 channels
“M 863” MYE“M 900” MYE
“J2 806” Japan
30 channels
“E 863”
Enercise
“C 900” Cardio
Theater
“A 863” Audeon
“E 900”
Enercise
“B 900”
Broadcast
Vision
6.
Press Display option key to scan for available channels.
The scan can take up to 10 seconds and then display channel number. Some of these channels
may not be signals from the TV transmitters and need to be deleted.
Review channels
1.
Press Up or Down to listen to available channels with the headphones.
2.
Delete unwanted channels by pressing Resistance Up or Down to change the right LED
window to [dEL].
Press Enter to delete channel. Repeat process for additional unwanted channels.
3. Adjust the near/far setting if available channels are not showing.
Press Setup key to change the setting from F (Far) to n (Near). Press Display option to re-scan
for available channels.
Page 33 of 80
Cybex 525C/525R Cycle Part Number LT-24303-4 E
To Next Page
Loading...
