CYBEX 625T Owner's Manual

5. Wrap the power cord around the outer power cord retaining brackets to desired length.
Qty.Description
1Power cord1
1
Power cord retaining bracket,
Inner
2
2
Power cord retaining brackets,
Outer
3
The power cord can be routed with full or half wraps around power cord retaining brackets. The
power cord can then exit to the left or right of the treadmill.
Qty.Description
1Power cord1
1Half wrap2
1Full wrap3
1Exit left or right4
6. Plug the main power cord into the power outlet.
7. Toggle the on/off (I/O) power switch to the on (I) position.
8. Press Quick Start and operate the elevation through full incline. If power cord is too short or interferes
with the movement of the treadmill, change the wrap of the power cord.
9. Secure the power cord with two wire ties.
Qty.Description
1Power cord1
2Wire tie2
Setup
Use the following instructions to setup the unit.
Falling hazard. When starting unit
• Stand on two top steps.
• Do not stand on belt.
Page 30 of 88
Cybex 625T Treadmill Part Number LT-23221-4 H

CYBEX 625T Specifications

General

User Weight Capacity	400 lbs
Speed Range	0.5 - 12.4 mph
Incline Range	0% to 15%
Display	LED
Heart Rate Monitoring	Contact and wireless
Running Area	60" x 20" (152 x 51 cm)