Cybex 750C/750R Owner’s Manual
Assembly and Setup
Page 2–2
Unit Assemby
WARNING: Use extreme caution when assembling the unit. Failure to do so could result in injury.
WARNING: Always use proper lifting methods when moving heavy items.
Tools Required
• 3/16” Allen wrench (supplied with 750R only)
• Phillips screwdriver
• 1/2” Socket wrench
• 9/16” Open end wrench
NOTE: The words “left” and “right” denote the user’s orientation.
1. Read and understand all instructions thoroughly before assembling the unit.
2. Verify correct package.
A. Read box label to verify the model number and voltage match what was ordered.
B. Lift and remove cardboard sleeve surrounding unit.
C. Verify paint color matches what was ordered.
D. Verify correct voltage by reading voltage sticker near power outlet. NOTE: AC power kit is
optional.
750C Assembly
1. Unpack and verify contents of boxes.
A. Verify the following items are present. See Figure 1a and 1b. Check off each item as found. See
Chapter 5 - Customer Service for contact information if any parts are missing.
To Next Page
Loading...
Need help?
General
