Cybex 750C/750R Owner’s Manual
Preventive
Maintenance
Page 4-2
Statistics
The Statistics screen allows tracking of equipment usage.
Open Statistics screen from Count Down, Lock, CSAFE ID Entry or Dormant Modes
Press Clear
Key 9-9-9
Press ENTER
Data features can also be accessed from the CSAFE port.
Use the ENTER key to advance to next screen.
Use the Load Control Keys to scroll forward or backward in the menu.
Statistics Menu Display
ST1 – REVOLUTIONS REVS YYYYYYY 0.0 – 999,999.9 = total revolutions (one revolution is
1,000 fl ywheel revolutions or 1K)
ST2 – HOURS HOURS 0 – 99999 = total user session time in hours
ST3 – STARTS STARTS XXXXXX 0 – 999999 = number of user workout sessions
ST4 – BATTERY BATTERY
XXXXXX
0 – 999,999 = number of whole minutes the battery has
been used
ST5 – ERRORS [Log #] [ERR #]
HH:MM M-DD-YY
Tracks error codes in a rolling log of 20 entries, each
stamped with time and date
ST6 – PROGRAM
USAGE
PR Y XXXXXX Y= program number
XXXXX = number of times program was chosen, set
completed and unit entered active mode
Clear data by holding Pause/End key for three seconds, listen for double beep, and press CLEAR.
Error Codes
When an error has occurred, “ERROR #” will appear on the text display alternating with the message
“OUT OF ORDER.”
NOTE: Log number will show in the Incline Display as L-01 through L-20.
Press CLEAR button and hold to clear all errors in log. The display reads “NO ERRORS” when log is
empty.
Press enter to exit out.
NOTE: See contact information in Chapter 5 – Customer Service for all maintenance and service
activities.
To Next Page
Loading...
Need help?
General
