CYBEX 770T - Page 147

Remove deck pivot assembly
1. Remove the two bolts, split washers and flat washers securing the front of the deck pivot bracket
using a 5/32” Allen wrench.
Qty.DescriptionItem
2Bolt1
2Split Washer2
2Flat Washer3
2Deck Pivot Bracket4
4Bushing5
2Mounting Bolt6
2Retaining Ring7
1Deck Pivot Shaft8
2. Remove the two mounting bolts securing the deck pivot shaft to the frame using a 1/2” Socket
wrench. There is one bolt at each end of the deck pivot shaft.
With the deck pivot shaft out of the unit you can now remove the bushings, deck pivot brackets, and
the retaining rings.
Page 147 of 261
Cybex 770T/790T Treadmill Part Number