CYBEX 770T Service Manual

2. Toggle the power switch on (I).
Console damage may occur.Do NOT turn the power off, press any keys,
or remove the USB stick during this procedure.
The software will load into the console. This procedure may take up to 4 minutes. During the first
two minutes the screen will be blank and not show any progress. Do NOT turn the power off, press
any keys, or remove the USB stick.
After the initial period, the screen will display Loading and Please wait. This procedure may take
up to 2 minutes. When the upload is complete, the display will return to the home screen.
3. Toggle the power switch off (0).
4. Remove USB stick from external USB port.
Install access cover
Install the two screws securing the access cover to the handset using a Phillips screwdriver.
Qty.DescriptionItem
1Access Cover1
2Screws2
1Handset3
Complete update
1. Verify the power cord is not being pinched under the front of the treadmill.
2. Toggle power switch on (I).
3. Operate unit at all levels to verify proper operation.
Calibration
Calibrate CardioTouch screen
1. Tap the Access Toolbox icon to display the Access to Toolbox login screen.
2.
Enter the sequence: .
3. Tap the OEM Diags icon, then the Touch Test icon.
Page 119 of 261
Cybex 770T/790T Treadmill Part Number

CYBEX 770T Specifications

General

Weight Capacity	400 lbs
Speed Range	0.5 - 12.4 mph
Incline Range	0 - 15%
Running Surface	22" x 60"
Heart Rate Monitoring	Yes
Display	15" Touch Screen