2. Remove the two screws securing the headphone jack cover to the handset using a Phillips
screwdriver.
Qty.DescriptionItem
1Internal USB Port1
1Handset2
2Screws3
1Headphone Jack Cover4
3. Insert USB stick into the internal USB port.
4. Toggle the power switch on (I).
Console damage may occur.Do NOT turn the power off, press any keys,
or remove the USB stick during this procedure.
The software will load into the console. This procedure will take approximately 3 minutes. During
this time there will be beeping noises from the console. When the upload is complete, the display
will show [re][bot].
5. Toggle the power switch off (0).
6. Remove USB stick from internal USB port.
Install software through external USB port
1. Insert USB stick into the external USB port.
Qty.DescriptionItem
1External USB port1
Page 118 of 261
Cybex 770T/790T Treadmill Part Number