CYBEX 770T Service Manual

4. Tap or to adjust settings.
SettingsFeature
Select Off or Last. Last will set caption mode to last used setting.
Power on Captions Mode
(ATSC only)
Select Off or Last. Last will set subtitle mode to last used setting.
Power on Subtitles Mode
(DVB-T only)
Set current time automatically from digital signal. Select time zone and
daylight savings time to Auto, On, or Off.
Digital Mode Time Setup
Provides diagnostic information only. Settings cannot be changed.Diagnostics
Select Enabled or Disabled.
Caption Text Modes
(ATSC only)
5.
Tap the Setup icon to return to SETUP MODE menu.
OSD Language
1. Tap or to select OSD Language.
2. Tap or to select language.
DescriptionOption
English, Français or Español.ATSC choices
English, Français, Español, Dutch, Danish, Russian, German, and Swedish.DVB-T choices
3.
Tap the Setup icon to return to SETUP MODE menu.
4.
Exit Set Up Mode by tapping the Toolbox icon, then tap the Home icon . The screen will
refresh.
Setup Complete
Cybex GO Setup
Prerequisites:
• Coax cable with TV signal
• Netpulse Gateway installed and running, providing the connection via:
• Wired (Ethernet) – Ethernet cable is connected to the Cybex equipment through a network switch
to the Gateway
• Wireless – Gateway has been installed in the facility using a unique wireless access point. Cybex
GO Monitor will not connect to any other routers in the area.
• Power to the Cybex Equipment.
Page 58 of 261
Cybex 770T/790T Treadmill Part Number

CYBEX 770T Specifications

General

Weight Capacity	400 lbs
Speed Range	0.5 - 12.4 mph
Incline Range	0 - 15%
Running Surface	22" x 60"
Heart Rate Monitoring	Yes
Display	15" Touch Screen