CYBEX 770T - Page 232

4. Carefully lift handset assembly and unplug the following cables: graphics board (J12), handset
membrane (J9), contact heart rate grips (J7) and the ground wire (located under the MCC board).
Qty.DescriptionItem
1MCC board1
1Graphics board (J12)2
1Handset membrane (J9)3
1Contact heart rate grips (J7)4
Remove USB board
1. Remove the two screws securing the access cover to the handset using a Phillips screwdriver.
Qty.DescriptionItem
1Handset1
2Screw2
1Access Cover3
Page 232 of 261
Cybex 770T/790T Treadmill Part Number