Cybex 425T Treadmill Owner’s Manual
Assembly
and Setup
2-9
10. Level your treadmill.
A. Confi rm that your treadmill is on a level surface.
11. Attach emergency stop key.
A. Confi rm that the emergency stop key is in place over the e-stop button. See Figure 12. NOTE:
The treadmill will not run without the key (or other metal) in place.
Figure 12
Figure 13
Emergency
Stop Key
Pinch
Points
Power
Cord
Emergency
Stop Button
12. Properly route power cord.
Route power cord away from pinch points such as the elevation assembly. See Figure 13.A.
To Next Page
Loading...
Need help?
General
