CYBEX V Series Assembly Instructions

DescriptionItem
Jam Nut1
Stabilizing Leg2
Note: Stabilize the treadmill each time the unit is relocated.
Note: It is extremely important that the stabilizing leg be correctly adjusted for proper operation. An
unbalanced unit may cause striding belt misalignment. A bubble level is recommended to ensure proper
leveling.
Power Switch
Located on the front panel at the base of the treadmill, the ON/OFF switch has two positions: "I" (one) for ON and
"0" (zero) for OFF.
Page 11 of 31

CYBEX V Series Specifications

General

Brand	CYBEX
Model	V Series
Category	Treadmill
Language	English