CYG PRS-7910 User Manual

PRS-7910
PRS-7910 3
2 Technical Data
2.1 Power Supply
Standard
IEC 60870-2-1:1995
Rated voltage
110VDC/125VDC/220VDC, 220VAC
Operating range
85-265VDC, 85-265VAC
Frequency
50/60Hz
2.2 Communication rate
Ethernet
Transmission rate
10/100/1000Mbps
Serial ports
Type
RS232, RS485
Baud rate
300 ~ 38400bps
Validation
1 start bit, 8 data bits, no verification and 1 stop bit
2.3 hardware configuration table
No.
Item
Parameter
1
CPU
Intel® Celeron® 2980U Processor (2 Cores, 2M Cache,
1.60 GHz)
2
Internal memory
4G DDR3L
3
Hard disk
128 GB SLC SATA electronic hard disk
4
Operating system
Linux debian 5.0（kernel 3.10）
5
Interface
3 USB2.0 interfaces.
6/12 RJ45, 10/100/1000M self-adaptive internet access.
8-channel RS232/485 serial port，in which, COM2-COM8
supports 232 parallel connection.
1-channel IEEE1588 time-check function and VGA
interface.
6
Power supply
DC 110V/220V（85V-265V）.
AC 220V（85-265V），50/60Hz.
2.4 Signal transmission quantity parameter
Maximum number of Measurement signals
51200
Maximum number of remote signals
65000
Maximum number of remote control signals
25600
Maximum number of remote pulse signals
4096
Maximum number of remote set signals
4096

CYG PRS-7910 Specifications

General

Brand	CYG
Model	PRS-7910
Category	Network Hardware
Language	English