PRS-7910
PRS-7910 21
8 Configurable Function
8.1 Overview
The PRS-COMM configuration and debugging tool is the auxiliary software designed for the PRS
series communication devices (including remote terminal unit, station manager, protocol converter,
and gateway) with offline configuration and online debugging functions.
The PRS series communication device is the new generation of communication device produced
by CYG SUNRI on the research of integrated automation system and the site operation
experience over years. The PRS-COMM configuration and debugging tool works as the
associated auxiliary software is designed and developed on the basis of the object-oriented
technology, the network-based database technology, the cross-platform visual technology and the
latest industrial standards, which can fully support IEC60870-5-103, IEC61850 and other
international standards and to meet the configuration and debugging demands of communication
device in traditional substation, digitalized substation and power plant.
NOTICE!
For the detailed function instruction and operating procedure of the auxiliary software,
please refer to "PRS-COMM Configuration and Debugging Tool Instruction Manual".
8.2 Function
The following functions are included:
Configuration and management of IED in station: This tool can configure all the IEDs
connected to the PRS series communication device. And in the same time, user can view the
configurations of all the IED through this tool.
Offline configuration function: The access and transfer rules of the PRS series communication
device can be configured to meet the site requirements.
Visual configuration of device: This graphical and symbolical tool is designed to facilitate the
configuration of the PRS series communication device, most of the operations can be
accomplished several clicks on the mouse.
Online debugging function: This tool integrates the download and debugging functions. The
configured scheme can be downloaded to the corresponding PRS series communication
device, and the device status can be viewed and debugged online through the tool.
8.3 Application
The PRS-COMM configuration and debugging tool of the PRS series communication device is
applicable to:
Power system
The integrated automation system of a new substation (traditional, digitalized, various voltage The
renewal of integrated automation system of an existing substation (traditional, digitalized, various
voltage levels)
To Next Page
Loading...
Need help?
General