Preface
PRS-7910 iii
Operating environment
ONLY use the device within the range of ambient environment and in an
environment free of abnormal vibration.
Ratings
Check the input ratings BEFORE applying AC voltage/current and power supply to
the device.
Printed circuit board
Do NOT attach or remove printed circuit board if the device is powered on.
External circuit
Check the supply voltage used when connecting the device output contacts to
external circuits, in order to prevent overheating.
Connection cable
Carefully handle connection cables without applying excessive force.
NOTICE!
The firmware may be upgraded to add new features or enhance/modify existing
features, please MAKE SURE that the version of this manual is compatible with the
product in your hand.
Copyright © 2017 CYG SUNRI. All rights reserved.
We reserve all rights to this document and to the information contained herein. Improper use in particular reproduction and dissemination
to third parties is strictly forbidden except where expressly authorized.
The information in this manual is carefully checked periodically, and necessary corrections will be included in future editions. If
nevertheless any errors are detected, suggestions for correction or improvement are greatly appreciated.
We reserve the rights to make technical improvements without notice.
CYG SUNRI CO., LTD.
Headquarters: No.13, Keji North 1st Road, North Area of Hi-tech
Industral Park, Nanshan District, Shenzhen, China
Tel: +86-400-678-8099
Website: http://www.sznari.com
P/N: ZL_PRS-7910_X_Instruction Manual_EN_Overseas General_X
To Next Page
Loading...
Need help?
General