D-Link AC1900 - Page 49

45D-Link DIR-878 User Manual
Section 4 - Conguration
PPPoE
Select 111P& if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet.
MTU
PPPoE Session: Choose Share with IPv4 to re-use your IPv4 PPPoE username and
password, or Create a new session.
Address Mode Select Static IP if your ISP assigned you an IP address. In most cases,
select Dynamic IP.
MTU Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
If you selected Static IP as the Address Mode and Share with IPv4 as the PPPoE Session:
IP Address: Enter the IP address provided by your ISP
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
If you selected Create a new session as the PPPoE Session:
Username: Enter the username provided by your ISP
Password: Enter the ISP service name (optional).
Address Mode: Select either "MXBZTPO or Manual.
Service Name: Enter the ISP service name (optional).
Reconnect Mode Select either "MXBZT0O or Manual.