90D-Link DIR-878 User Manual
Section 5 - Quick VPN
Quick VPN Server Setup Instructions
Congure the following options:
Click Save and proceed to client setup pages.
L2TP over IPSec: Enable or disable the Quick VPN server.
If you enable Quick VPN, the following options are available:
Username: . Enter a username between 1 and 20 characters
Password: Enter a password between 1 and 20 characters.
PSK: Enter a passkey between 6 and 64 characters.
Authentication
Protocol:
Choose the authentication protocol type: .4$)"1W, 1"1, or $)"1.
.4$)"1Wis the default.
MPPE: Select the encryption cipher strength: none, RC4-40, or RC4-128.
RC4-128 is the default.
Click Save when you are done.