D-Link AC1900

59D-Link DIR-878 User Manual
Section 4 - Conguration
Smart Connect
Smart Connect: Enable or disable the Smart Connect Feature. When enabled only
a few conguration options are available to simplify conguration.
Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters.
Password: Create a password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Advanced Settings
Security Mode: Choose None or 81"81"1FSTPOBMrecommended).
Transmission
Power:
Select the desired wireless transmission power.
Schedule: Use the drop-down menu to select the time schedule that the rule
will be enabled on. The schedule may be set to "MXBZT&OBCMF, or
you can create your own schedules in the Schedules section. Refer
to Schedule on page 81 for more information.
Wi-Fi Protected Setup
The easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup
(WPS). Using WPS-PIN disabled by default due to security vulnerabilities.
WPS-PBC Status: Enable or disable WPS-PBC fuctionality.
WPS-PIN Status: Enable or disable WPS-PIN fuctionality.
Refer to the next page if you wish to disable Smart Connect or click
Save when you are done.
From this page you can congure your wireless network settings.
Wireless