D-Link AC1900

38D-Link DIR-878 User Manual
Section 4 - Conguration
Auto Detection
Select "VUP%FUFDUJPO to automatically detect the IPv6 connection method
used by your Internet Service Provider (ISP). If Auto Detection fails, you
manually select another IPv6 connection type.
IPv6 DNS Settings
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
If Use the following DNS address is selected:
Primary DNS
Server:
If you selected Use the following DNS address above, enter the
primary DNS server address.
Secondary DNS
Server:
If you selected Use the following DNS address above, enter the
secondary DNS server address.
LAN IPv6 Address Settings
Enable DHCP-PD: Enable or disable DHCP Prex Delegation.
LAN IPv6 Link-
Local Address:
Displays the router’s LAN link-local address.
If Enable DHCP-PD is disabled these additional parameters are available for
conguration:
LAN IPv6 Address: Enter a valid LAN IPv6 address.
LAN IPv6 Link-
Local Address:
Displays the router’s LAN link-local address.