D-Link DAP-1160

27D-Link DAP-1160 User Manual
Section 2 - Conguration
MAC Filter List:
This list will display the MAC addresses that
are in the selected lter.
Access Control
Use MAC Filters to allow or deny wireless clients, by their MAC addresses, from accessing the DAP-1160. You can manually add a MAC
address or select the MAC address from the list of clients that are currently connected to the AP (Connected PCs). The default setting is
Disable MAC Filters.
This function is available if the DAP-1160
is in WISP Client Router or WISP Repeater
mode.
IP lter rules are used to secure or restrict your
local network. It will deny wireless clients by
their IP Addresses from the local network to the
Internet. Click Save Settings and the IP lter
rule will be put into the Port Filter List.
IP Filter Rules:
Enter the IP address of the computer on
your local network that you want to deny the
outgoing trafc to.
IP Address:
Select TCP, UDP, or Both.Trafc Type:
Access control is set to Disable by default.
Select Reject to deny access to the AP. Select
Accept to allow access to the AP.
Access
Control:
Enter the MAC address of the client that you
want to allow or deny access to the AP.
MAC Address:
Select the MAC address of a computer from
the drop-down menu and click Clone to ll in
the MAC Address eld with that computer.
Connected
PCs: