D-Link DAP-1160

33D-Link DAP-1160 User Manual
Section 2 - Conguration
Maintenance
Device Administration
Enter a new password.
Re-enter the password to conrm it.
New
Password:
Conrm
Password:
Save and Restore
Click Save to save the current system
settings as a le onto your local hard
drive.
Save Settings
To Local Hard
Drive:
Load Settings
From Local Hard
Drive:
To load a system settings le, click on
Browse to browse the local hard drive
and locate the system settings le to be
used. Click Upload Settings when you
have selected the le to be loaded back
onto the access point.
Restore To
Factory Default
Settings:
You can reset the DAP-1160 back to the
factory default settings by clicking on
Restore Device. Make sure to save the
current system settings before clicking on
Restore Device. You will lose your current
system settings after you click Restore
Device.