6D-Link DAP-1160 User Manual
Section 1 - Product Overview
• Seven operation modes – Can be exibly congured to operate as an Access Point, AP Client, Bridge, Bridge with
AP, Repeater, WISP Client Router or WISP Repeater.
• Total security – Complete set of security features including WEP encryption and WPA/WPA2 to protect your network
from outside intruders.
• Two integrated Ethernet ports – Two Ethernet ports for ready connection to two computers, or to an Ethernet-
enabled device (for example, a broadband router) and a PC.
• Connect home and soho to a wireless network – Create a wireless network for your home and ofce using the
D-Link DAP-1160 Wireless Access Point. Connect this Access Point to a broadband modem and wirelessly share
your Internet connection. Enjoy surng the web, checking e-mail, and chatting with family and friends online.
• Protect wireless network and data – The DAP-1160 provides 64/128-bit WEP encryption and WPA/WPA2 security
to protect your network and wireless data. In addition, it also provides MAC address ltering and the Disable SSID
Broadcast function to limit outsiders’ access to your home and ofce network.
• Flexibly congure your AP for different applications – The DAP-1160 can be congured to operate as (1) an
Access Point to act as a central hub for wireless users, (2) an AP Client to connect to another Access Point, (3) a
Bridge to join two wireless workgroups together, (4) a Bridge with AP to act as a wireless hub and a bridge at the
same time, (5) a Repeater to extend the wireless coverage to cover all "dead" spots, (6) a WISP Client Router
to let
wireless Internet service subscribers share an Internet connection with home and ofce Ethernet-enabled computers
without the need for an extra router, or (7) a WISP Repeater to let WISP subscribers share Internet connection with
wireless computers without an extra router.
1 Maximum wireless signal rate based on IEEE Standard 802.11g specications. Actual data throughput will vary. Network conditions and environmental
factors, including volume of network trafc, building materials and construction, and network overhead lower the actual data throughput rate.
Features
To Next Page
Loading...
Need help?
General
