D-Link DAP-1160

26D-Link DAP-1160 User Manual
Section 2 - Conguration
Port Filter
This function is available if the DAP-1160 is in WISP Client Router or WISP Repeater mode. This feature is used to secure or restrict your
local network. It will deny the ports that you enter from the local network to the Internet. Click Save Settings and the port lter rule will
be put into the Port Filter List.
Enter a name for the rule. You can select an
application name from the Application Name
drop-down menu. Click the << button to ll in
the Name eld with the application name that
you selected.
Name:
Enter the port or ports that you want to open.
If you want to open one port, enter the same
port in both boxes.
Start Port/End
Port:
Select TCP, UDP, or Both.Trafc Type:
Check the box to congure a port lter rule.Port Filter
Rules: