DAP-1325 N300 Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
Traceroute
On the System / Traceroute page, you can determine the route of data transfer to a host via the
traceroute utility.
Figure 65. The System / Traceroute page.
To determine the route, enter the name or IP address of a host in the Host field. If the route should
be determined using IPv6, move the IPv6 switch to the right. Click the START button. After a
while, the results will be displayed on the page.
To remove the check result from the page, click the CLEAR button.
Page 85 of 92
To Next Page
Loading...
Need help?
General
