D-Link DAP-1325-US - Settings; Extender Settings

32D-Link DAP-1325 User Manual
Section 3 - Conguration
Settings
Extender Settings
This page lets you congure the settings for the DAP-1325’s extended wireless network. To access this page, click the Settings drop-
down menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page.
This page lets you congure the settings for the DAP-1325’s extended wireless network. To access this page, click the Settings drop-
down menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page.
Existing Network
Select the type of existing network, either Ethernet or Wi-Fi
you want the DAP-1325 to connect to.
This is the name of the uplink network the DAP-1325’s
connects to. You may also manually set the SSID of the
uplink network or press the Scan button to perform a scan
of available networks.
Enter the password to connect the DAP-1325 to the uplink
network.
Existing
Network:
Wi-Fi Name
(SSID):
Password:
Enable or disable this network by toggling this slider.
This is the name of the DAP-1325’s extended network.
If using Wi-Fi, the DAP-1325 will rebroadcast the uplink
router’s Internet connection under this SSID. You may also
manually set the SSID of the extended network.
Enter the password or network key that you wish to use for
the extended network.
Status:
Wi-Fi Name
(SSID):
Password:
2.4 GHz Extended Wi-Fi
If you selected Wi-Fi, the following options are available: