DAP-1325 N300 Wi-Fi Range Extender
User Manual
Installation and Connection
6. Select the Use the following IP address radio button and enter the value
192.168.0.51 in the IP address field. The Subnet mask field will be filled in
automatically. Click the OK button.
Figure 14. The Internet Protocol Version 4 (TCP/IPv4) Properties window.
7. Click the OK button in the connection properties window.
8. To open the list of available wireless networks, select the icon of the wireless network
connection and click the Connect To button or left-click the network icon in the
notification area located on the right side of the taskbar.
Figure 15. The notification area of the taskbar.
Page 24 of 92
To Next Page
Loading...
Need help?
General
