D-Link DAP-1325-US User Manual

DAP-1325 N300 Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
Additional
On page of the Wi-Fi / Additional section, you can define additional parameters for the WLAN of
the extender.
!
Changing parameters presented on this page may negatively affect your WLAN!
Figure 54. Additional settings of the WLAN.
The following fields are available on the page:
Parameter Description
Bandwidth
The channel bandwidth for 802.11n standard.
20MHz: 802.11n clients operate at 20MHz channels.
40MHz: 802.11n clients operate at 40MHz channels.
20/40MHz -: 802.11n clients operate at 20MHz or 40MHz channels
(the channel is combined with the previous adjacent channel).
20/40MHz +: 802.11n clients operate at 20MHz or 40MHz channels
(the channel is combined with the next adjacent channel).
TX power The transmit power (in percentage terms) of the extender.
Page 68 of 92

D-Link DAP-1325-US Specifications

General

Product Type	Range Extender
Wireless Standard	802.11n
Frequency Band	2.4 GHz
Maximum Wireless Speed	300 Mbps
Maximum Data Rate	300 Mbps
Antenna Type	Internal
Antennas	2
WPS Support	Yes
Security	WPA/WPA2
Operating Humidity	10% to 90% non-condensing
Device Type	Range Extender
Wireless Standards	IEEE 802.11b/g/n
Ports	1 x 10/100 Mbps Ethernet
Dimensions	66 x 48 x 33 mm
Weight	32 g
Operating Temperature	0 to 40 °C