DAP-1325 N300 Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
Changing LAN IPv4 Address
This configuration step is available for the Access point, Repeater, and Client modes.
1. If the LAN IPv4 address of DAP-1325 coincides with the LAN IPv4 address of the router to
which it connects, then set another LAN IPv4 address of DAP-1325 in the IP address
field.
Figure 29. The page for changing the LAN IPv4 address.
2. Click the NEXT button to continue or click the BACK button to return to the previous page.
Page 35 of 92
To Next Page
Loading...
Need help?
General
