DAP-1610 AC1200 Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
Wi-Fi Client
This configuration step is available for the Repeater and Client modes.
1. On the Wi-Fi client page, in the Wireless Networks section, select the network to which
you want to connect. When you select a network, the Network name (SSID) and BSSID
fields are filled in automatically.
If you cannot find the needed network in the list, click the UPDATE LIST button.
2. If a password is needed to connect to the selected network, fill in the relevant field.
Figure 25. The page for configuring the Wi-Fi client.
Page 30 of 91
To Next Page
Loading...
Need help?
General
