DAP-1620 AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
Configuration
On the System / Configuration page, you can change the password for the administrator account
used to access the web-based interface of the extender and to access the device settings via
TELNET and SSH, restore the factory defaults, backup the current configuration, restore the
extender's configuration from a previously created file, save the changed settings to the non-volatile
memory, reboot the device, or change the web-based interface language.
Figure 75. The System / Configuration page.
In order to change the password for the administrator account, in the User section, enter a new
password in the New password and Password confirmation fields. Use digits, Latin letters
(uppercase and/or lowercase), and other characters available in the US keyboard layout.
11
Click the
Show icon ( ) to display the entered values. Then click the SAVE button.
!
Remember or write down the new password for the administrator account. In case of losing
the new password, you can access the settings of the extender only after restoring the
factory default settings via the hardware RESET button. This procedure wipes out all
settings that you have configured for your extender .
To change the web-based interface language, select the needed value from the Language drop-
down list.
11 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
Page 101 of 125
To Next Page
Loading...
Need help?
General
Weight and Dimensions
