D-Link DAP-1650 - Web-based Configuration Utility

17D-Link DAP-1650 User Manual
Section 3 - Conguration
This section will show you how to congure your D-Link wireless access point using the web-based conguration utility.
Web-based Conguration Utility
If you wish to change the default settings or adjust the
conguration of the DAP-1650, you may use the web-based
conguration utility.
To access the conguration utility, open a web browser
such as Internet Explorer and enter http://dlinkap.local
in the address eld.
Select Admin from the drop-down menu and then enter
your password. Leave the password blank by default.
If you get a Page Cannot be Displayed error, please refer to
“Troubleshooting” on page xc for assistance.