D-Link DAP-1650 - Features

7D-Link DAP-1650 User Manual
Section 1 - Product Overview
• Faster Wireless Networking - The DAP-1650 provides combined wireless speeds of up to 1200 Mbps
1
. This capability
allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio.
• Flexible Operation Modes - The DAP-1650 can operate as an Access Point, Repeater, and Media Bridge, meaning that
you can customize its operation to suit your specic networking requirements.
• Gigabit Ethernet Ports - The built-in Gigabit Ethernet ports facilitate a wired connection of up to 1 Gbps, meaning
that wired devices can also take advantage of the DAP-1650’s high-speed wireless capabilities.
• Compatible with IEEE 802.11n/g/b/a Devices - The DAP-1650 is still fully compatible with the 802.11n/g/b/a standards,
so it can connect with existing wireless adapters found on older devices.
• Robust Security - Use WPS (Wi-Fi Protected Setup) to create a secure connection to new devices in a matter of seconds
by simply pushing a button or entering a PIN. There’s also WPA/WPA2 security encryption, allowing you to customize
your network’s security.
• User-friendly Setup Wizard - Through its easy-to-use web-based user interface, the
DAP-1650 lets you control what
information is accessible to those on the wireless network, whether from the Internet or from your company’s server.
Congure your access point to your specic settings within minutes.
Features
1
Maximum wireless signal rate derived from draft 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of
network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely aect wireless signal range.
Wireless range and speed rates are D-Link RELATIVE performance measurements based on the wireless range and speed rates of a standard Wireless N product from D-Link.