D-Link DAP-1650 - Introduction

6D-Link DAP-1650 User Manual
Section 1 - Product Overview
Introduction
D-Link, an industry leader in networking, introduces the new D-Link DAP-1650 Wireless AC1200 Dual-band Gigabit Range Extender.
With the ability to transfer les with a maximum combined wireless signal rate of up to 1200 Mbps
1
, the DAP-1650 gives you
high-speed wireless network access for your home or oce.
The DAP-1650 is compliant with the latest draft IEEE 802.11ac standard, meaning that it can connect and inter-operate with
other 802.11ac compatible wireless client devices. The DAP-1650 is also backwards compatible with 802.11b/g/n devices. It
can be exibly congured to operate in 3 dierent modes: Access Point, Media Bridge, and Repeater. With its setup wizard,
the DAP-1650 ensures that you will be up and running on a wireless network in just a matter of minutes.
The DAP-1650 features Wi-Fi Protected Access (WPA-PSK/WPA2-PSK) to provide an enhanced level of security for wireless
data communications. The DAP-1650 also includes additional security features to keep your wireless connection safe from
unauthorized access.
The DAP-1650 also supports Wi-Fi Protected Setup (WPS), repeater and wireless client operation modes each capable of being
conveniently set up by using the PIN or Push Button methods.
1
Maximum wireless signal rate derived from draft 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of
network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely aect wireless signal range.
Wireless range and speed rates are D-Link RELATIVE performance measurements based on the wireless range and speed rates of a standard Wireless N product from D-Link.