32D-Link DAP-1650 User Manual
Section 3 - Conguration
Wireless
Channel:
Transmission
Rate:
Channel
Width:
Visibility
Status:
Site Survey:
Security
Mode:
Indicates the channel setting for the DAP-1650. The channel can
be changed to t the channel setting for an existing wireless
network or to reduce interference in congested areas. If you
enable Auto Channel Scan, this option will not be available.
Use the drop-down menu to select the appropriate transmission
rate in Mbits per second. Many users will want to use the default
setting, Best (automatic).
Select the channel width:
Auto 20/40/80 - Select this option if you are using a combination
of 802.11ac, 802.11n, and other wireless devices.
Auto 20/40 - Select if you are using both 802.11n and non-
802.11n wireless devices.
20 MHz - Select if you are not using any 802.11n wireless clients.
Select whether you would like the network name (SSID) of your
wireless network to be Visible or Invisible to wireless clients.
If Invisible, the SSID of the DAP-1650 will not be seen by site
survey utilities, so wireless clients will have to manually enter
the SSID of your wireless network in order to connect to it.
Click Site Survey to display a list of wireless networks
in your area. You may select the wireless access point
to connect to.
For information on how to set up wireless security, please refer
to “Conguring Wireless Security” on page 36.
Click Save Settings at the bottom of the page to save the
current conguration.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
